Description :

Tetric N-PowerFlow 2 is a light-curing, radiopaque, flowable composite resin designed by Ivoclar primarily for bulk-fill restorations of posterior (back) teeth. It is part of the Tetric N2-Line of dental composites and can be cured in increments of up to 4 mm. 

Key Features :

Aessencio and Ivocerin technology: The composite uses Aessencio technology, which reduces translucency during polymerization to achieve a more lifelike aesthetic, especially when used to restore discolored tooth structure. The patented Ivocerin light initiator enables reliable curing of the large 4 mm increments, allowing for short light exposure times.

Efficient and time-saving: As a 4 mm bulk-fill material, it allows for fewer layers during the restorative process, which can reduce treatment time by up to 51% in the posterior region when used with other complementary Ivoclar products like Tetric N-PowerFill 2.

Self-leveling: The material's flowable consistency and self-leveling effect ensure excellent adaptation to cavity walls, reducing the risk of air entrapment and providing a good marginal seal.

Specification :

Tetric N-PowerFlow 2 is indicated for direct restorative treatments in posterior teeth. Its primary indications are: 

As the first increment or initial layer in Class I and Class II restorations in permanent posterior teeth.

Restorations in deciduous (baby) posterior teeth.

For restoring occlusal surfaces. 

Packaging :

1 x 2g Syr

Description :

The Ivoclar Tetric N-PowerFill 2 is a light-curing, radiopaque, sculptable composite specifically designed for direct restorations in posterior teeth. As part of the Tetric N2-Line of dental composites from Ivoclar, it allows for efficient 4 mm bulk placement. It incorporates Ivocerin and Aessencio technology for lifelike esthetics and has a non-sticky consistency for easy handling.

Key Features :

Aessencio technology: This allows the composite's translucency to gradually decrease as it polymerizes, mimicking the natural appearance of tooth enamel and dentin.

Ivocerin light initiator: This patented initiator enables the material to be reliably cured in 4 mm increments with short light exposure times.

Low stickiness: The material's consistency makes it easy to sculpt and create anatomical structures.

High radiopacity: The material has a radiopacity of 300% Al, which makes it clearly visible on X-rays for easy differentiation from tooth structure.

True-to-nature esthetics: The chameleon effect allows for a natural shade blend with the surrounding tooth structure.

Specification :

Tetric N-PowerFill 2 is intended for direct restorative treatments in the posterior region. Specific indications include: 

Restorations in posterior teeth:Class I and II restorations in permanent posterior teeth.Class I and II restorations in deciduous posterior teeth.Occlusal surface restorations.

Reconstructive build-ups: When light-cured with an intensity \(\le \) 1,300 mW/cm

Small restorations of all types: According to the Tetric N-Collection documentation.Extended fissure sealing.Splinting of mobile teeth.

Packaging :

Refill - 1 x 3.5g Syr

Assortment - 2 x 3.5g Syr

Description :

Ivoclar Tetric N-Flow 2 is a light-curing, radiopaque, flowable nanohybrid composite used for dental restorations. It is designed as a universal composite for use in both anterior and posterior teeth. The material is part of the Tetric N2-Line of dental composites and is formulated with nano-optimized technology.

Key Features :

Nanohybrid technology: It is composed of fine fillers that create a strong, polishable, and natural-looking restoration.

Flowable consistency: The material has a thixotropic, or shear-thinning, property, which means it flows easily under pressure for precise application but remains stable when not being manipulated.

High radiopacity: The composite is highly visible on X-rays, which helps with accurate diagnosis and monitoring of the restoration over time.

Chameleon effect: This feature allows the composite to blend naturally with the surrounding tooth structure, providing a seamless and esthetic result.

Excellent handling: The material exhibits excellent wetting behavior and minimal stickiness, making it easy to adapt and contour, particularly in hard-to-reach areas.

Specification :

Liner/Base: As the first layer under Class I and Class II restorations.

Restorations of all types:

Anterior restorations: Classes III and IV.

Class V restorations: Including cervical caries, root erosion, and wedge-shaped defects.

Small restorations: For minor repairs and filling small cavities.

Extended fissure sealing: For sealing wide or deep pits and fissures to prevent decay.

Splinting of mobile teeth: To stabilize loosened teeth.

Repair work: For repairing composite and ceramic veneers.

Packaging :

1 x 2g Syr

Description :

IPS Empress Direct Opaque is a light-curing, flowable material used in restorative dentistry to mask underlying discolorations and exposed metal surfaces. The product is available in a universal shade and is part of the IPS Empress Direct system manufactured by Ivoclar. 

Key Features :

High masking capability: The material is highly opaque, allowing for effective coverage of deeply discolored tooth structure, metal, and core build-ups with a very thin layer (maximum 0.5 mm).

Flowable consistency: The material's flowable nature enables precise application for characterization and masking.

Light-curing: Curing is achieved quickly and reliably using a dental curing light.

Universal opaque shade: A single shade of opaque material eliminates the need for complex shade matching, simplifying the restoration process.

Specification :

Masking discolored tooth structure: Used to block out tetracycline stains or other severe tooth discolorations before placing a final composite restoration.

Masking exposed metal surfaces: Applied to hide exposed metal when repairing damaged ceramic or composite veneers, inlays, onlays, or crowns intraorally.

Masking core build-ups: Used to mask core build-up materials in both anterior and posterior dental restorations.

Customization of restorations: Can be used along with other effect materials from the IPS Empress Direct system to customize direct restorations. 

AI responses may include mistakes. Learn more

Packaging :

1 x 1.8g Syr

Description:

Mani Nanocomposite is a light-cured, nano-filled dental restorative material designed for creating durable and aesthetic tooth restorations. It is known for its high filler content and true nanotechnology, which provides enhanced mechanical properties, polish retention, and a natural appearance.

Features :

Technology: Uses nanotechnology with ultra-fine filler particles, typically sized between 28 nm and 40 µm.

Filler Content: Features a high filler load, with about 83.5% by weight (66.5% by volume), which contributes to its superior strength and wear resistance.

Low Shrinkage: It has a low polymerization shrinkage of around 1.66%, which helps to minimize marginal gaps and reduce the risk of post-operative sensitivity.

Excellent Handling: The composite has a smooth, non-sticky consistency for easy application and sculpting.

Key Specifications :

Direct Restorations: For filling cavities in both anterior (front) and posterior (back) teeth, in all classes (I, II, III, IV, and V).

Indirect Restorations: For crafting indirect fillings such as inlays, onlays, and veneers.

Description :

Mani Micro Universal most likely refers to the Mani Micro Hybrid Composite, a universal, light-curing dental filling material. Its micro aspect comes from the fine filler particles, while universal indicates its versatility for use in both anterior (front) and posterior (back) teeth.

Features :

High luster and polish retention: Provides a smooth, homogenous surface for a natural appearance.

Abrasion resistance: Withstands heavy occlusal loads, making it suitable for long-lasting restorations.

Plaque-resistant: The smooth surface is resistant to plaque buildup.

Radiopaque: Allows for clear visibility on X-rays to check for marginal integrity and detect recurrent decay.

Key Specifications :

Direct restorations: Used for fillings in all classes of cavities, from Class I to Class V, in both anterior and posterior teeth. Indirect restorations: Can be used to create inlays, onlays, and laminate veneers.

Aesthetic enhancements: Adjusting the contours and shades of teeth to improve their appearance.

Packaging :

1 x 4g Syr

Description :

Mani Micro Hybrid Composite is a universal, light-curing, resin-based filling material for dental restorations. It is a micro-hybrid, meaning it combines both macro- and micro-sized filler particles to achieve an ideal balance of strength and aesthetics.

Features :

Composition: Contains ultrafine, radiopaque glass fillers in a light-curing resin matrix. The combination of filler sizes provides improved polishability compared to conventional hybrids, without sacrificing strength.

Aesthetics: Offers excellent polish and long-lasting polish retention, resulting in a high-luster and homogeneous surface that is plaque resistant. It is available in a wide range of shades to closely match natural tooth color.

Durability: The material is highly abrasion-resistant and can withstand heavy occlusal loads, making it suitable for high-stress areas. Its wear rate is comparable to natural tooth structure.

Key Specifications :

Class I, II, III, IV, and V cavities: It can be used for direct fillings in all classes of cavities, both load-bearing and aesthetic. Extended fissure sealing: The material is suitable for sealing deep fissures in molars and premolars to prevent decay. Stump build-up: It is used for building up the core of a tooth prior to placing a crown or other indirect restoration.

Packaging :

1 x 4g Syr

Description :

Mani Flo-V is a viscous, light-curing, flowable composite used by dentists for a variety of dental restorations and procedures. The material offers a combination of flowability and viscosity, allowing it to adapt well to cavity walls while resisting dripping.

Features :

Optimal Handling: It is both flowable and viscous, making for easy and precise application without running or dripping.

High Strength and Wear Resistance: The composite delivers stable and long-lasting restorations.

Excellent Aesthetics and Polishing: It allows for good aesthetic results and outstanding polish retention.

High Radiopacity: This feature makes it highly visible on dental X-rays.

Key Specifications :

Fissure Sealing: Used for sealing fissures, especially extensive sealing on molars and premolars.

Minimally Invasive Restorations: Suitable for fillings in  Class I, II, and III cavities where occlusal loads are not severe.

Class V Cavities: Effective for fillings in Class V cavities, including cervical caries, root erosions, and wedge-shaped defects.

Enamel Corrections: Used for restoring and making small corrections to defects in enamel.

Packaging :

1 x 2g Syr

Description :

Mani Flo is a brand of light-cured, flowable composite resin used in dentistry for restorations, fillings, and sealings. It is highly radiopaque, providing good visibility on X-rays, and is designed to have optimal flow characteristics for easy and precise application.

Features :

Light-curing: The composite hardens when exposed to a dental curing light.

Optimal flowability: It can easily adapt to cavity walls, ensuring complete surface wetting and minimal voids.

High strength and durability: It provides long-lasting, natural-looking restorations with excellent mechanical properties.

High polishability: Its low viscosity and thixotropic behavior result in excellent esthetics and long-lasting polish retention.

Key Specifications :

Fissure sealing and extended sealing on molars and premolars.

Fillings in  Class V cavities, including cervical caries, root erosions, and wedge-shaped defects.

Blocking out undercuts in preparation for other dental work.

Repairing existing composite or ceramic restorations.

Packaging :

1 x 2g Syr

Description :

Mani Bulk Fill Universal is a light-curing, radiopaque posterior composite material that is both flowable and highly viscous, designed to simplify and speed up posterior restorations. Its bulk-fill capacity allows for the placement of thicker material layers (up to 4 mm) in a single step, which significantly reduces chairside time.

Features :

Shade: The composite comes in a universal dentin shade that offers a natural-looking color adjustment. The shade is semi-translucent.

Handling: Mani Bulk is highly efficient to handle, featuring an optimized flow behavior with self-leveling properties that allows for easy adaptation to cavity walls with minimal manipulation.

Physical Properties: It offers excellent strength, high radiopacity, and low wear for long-lasting durability, essential for posterior restorations.

Adaptation: The material provides excellent adaptation to both the cavity bottom and walls, which helps minimize the risk of gaps or voids.

Key Specifications :

Mani Bulk Fill Universal is used for direct restorations, including:

Class I and II fillings: For posterior tooth fillings with layer thicknesses up to 4 mm.

Base fillings/liners: As a base layer with a thickness of up to 4 mm in Class II cavities.

Cavity lining: Can be used as the first (bottom) layer in Class I and II cavities.

Packaging :

1 x 2g Syr

Description:

Tetric PowerFlow is a light-curing, flowable composite resin from Ivoclar designed for posterior (back tooth) restorations. It is specifically engineered for efficient, bulk-filling applications in increments of up to 4mm and provides both strength and esthetics.

KeyFeatures

Aessencio Technology: The composite initially has a high translucency to allow light to penetrate and cure the material effectively. During polymerization (curing), the material's opacity increases, causing it to blend more naturally with the surrounding tooth structure.

Fast curing: It can be cured in as little as 3 seconds when used with a compatible high-intensity light-curing unit, such as Ivoclar's Bluephase PowerCure.

Excellent handling: The material has low shrinkage stress, outstanding flow properties, and excellent adaptation to cavity walls, allowing for fast and efficient volume replacement.

High performance: It features low shrinkage, optimal flexural strength, and a reliable depth of cure for long-lasting posterior restorations.

Specification :

As an initial or first layer in Class I and Class II bulk-fill composite restorations in posterior teeth.

Restorations in primary teeth (Classes I and II) without a capping layer.

Packaging :

1 x 2g Syr

Description :

Ivoclar Tetric PowerFill is a sculptable, light-curing, radiopaque 4-mm bulk-fill composite for direct restorative treatments in posterior teeth. It is designed to be efficient while providing excellent esthetics that mimic natural tooth structure. 

Key Features :

Aessencio Technology: This feature causes the composite to change from a translucent state to a more opaque, dentin-like shade during polymerization, improving esthetics in deep cavities.

Ivocerin Technology: A patented light initiator that ensures a reliable depth of cure for increments of up to 4 mm, even with short curing times.

Efficient treatment: When used with compatible high-intensity curing lights (e.g., Bluephase PowerCure), it can be light-cured in as little as three seconds. This, along with bulk-fill capability, can reduce overall treatment time significantly.

High performance: The material offers low shrinkage, high flexural strength, and low stickiness, which simplifies the creation of anatomical structures.

Specification :

Tetric PowerFill is intended for direct restorations in posterior (back) teeth and is suitable for both permanent and deciduous teeth. Specific indications include: 

Class I and II restorations in permanent posterior teeth.

Class I and II restorations in deciduous posterior teeth.

Class V restorations, such as cervical caries, root erosion, and wedge-shaped defects.

Reconstructive build-ups, with light-curing at a light intensity of $\le$1,300 mW/cm².

Packaging :

1 x 3.5g Syr

Description:

Ivoclar Tetric N-Flow is a light-curing, radiopaque, nano-hybrid flowable composite with a high-gloss finish. It is designed for precise and seamless application, especially in hard-to-reach areas, and complements the Tetric N-Ceram packable composite for esthetic restorations.

Key Features :

Flowable consistency: The material's excellent wetting and self-leveling behavior allows for easy and controlled application, ensuring close adaptation to cavity walls and margins.

Nano-optimized technology: This composition ensures a balance of strength, durability, and a natural, esthetic appearance.

High radiopacity: The composite is highly visible on radiographs, which aids in accurate diagnosis and evaluation of restorations.

Excellent stability: The material is stable enough to resist slumping, making it ideal for Class V restorations.

Specification :

Liner/Base: Used as a first increment or initial layer under Class I and Class II restorations.

Restorations:

Class V restorations (e.g., cervical caries, root erosion, wedge-shaped defects).

Anterior restorations (Classes III and IV).

Minimally invasive Class I restorations.

Small restorations of all types.

Packaging :

1 x 2g Syr

Description:

Ivoclar's Tetric N-Flow Bulk Fill is a flowable, light-curing composite resin designed for use as a base layer in posterior restorations. It is formulated to be used in large increments of up to 4mm, offering significant time savings compared to traditional incremental layering techniques.

Key Features :

Flowable viscosity: It has a self-leveling consistency, allowing it to adapt perfectly to cavity walls and create an even floor for the final restorative material. This also helps minimize the risk of voids and enhances marginal adaptation.

Aessencio technology: This feature causes the material's translucency to decrease during polymerization, changing from approximately 28% to 10%. This shift in opacity helps to mask discolored tooth structure for a more esthetic result.

Ivocerin light initiator: This highly reactive and patented initiator ensures a reliable and deep cure, even when applied in thick 4mm layers.

Shrinkage control: Tetric N-Flow Bulk Fill is formulated to reduce volumetric shrinkage and shrinkage stress.

Specification :

Base layer: It is used as the initial or first increment (up to 4mm) for Class I and II composite restorations in permanent teeth.

Pediatric restorations: It can be used for restorations in deciduous (primary) teeth without the need for a separate capping layer.

Class V restorations: The material is suitable for Class V restorations (cervical caries, root erosion, wedge-shaped defects).

Preventive restorations: It can be used for preventive restorations in molar and premolar teeth.

Packaging :

1 x 2g Syr

Description:

Ivoclar Tetric N-Ceram is a light-curing, radiopaque nano-hybrid composite designed for a wide range of direct restorative procedures. Its advanced technology offers excellent aesthetics, reliable mechanical properties, and ease of use for both anterior and posterior restorations.

Key Features :

Technology: Uses nano-hybrid technology, which incorporates a mix of different-sized filler particles, including nano-fillers. The "nano-optimized" formulation provides excellent strength, high polishability, and low wear.

Aesthetics: The material features nano-color pigments and specific filler technology that create a "chameleon effect." This allows the restoration to blend in naturally with the surrounding tooth structure. A wide range of shades is available, including enamel, dentin, bleach, and highly translucent options.

Handling: A nano-modifier ensures that the composite has optimal stability and is easy to sculpt without sticking to instruments.

Mechanical properties: It is known for low polymerization shrinkage and high strength.

Specification :

Universal use: Suitable for restorations in both the anterior (front) and posterior (back) teeth.

Cavity classifications: Recommended for Class I, II, III, IV, and V restorations.

Other applications:

Restoration of deciduous (baby) teeth.

Extended fissure sealing.

Direct veneers.

Splinting of mobile teeth.

Blocking out of undercuts.

Repair of composite and ceramic veneers.

Composite build-up

Packaging:

a) 3 x 3.5g Syr

1 x 3g Bonding Agent

2 x Netch

b) 8 x 3.5g Syr

1 x 6g Tetric n Bond

Description:

Ivoclar Tetric N-Ceram is a light-curing, radiopaque nano-hybrid composite designed for a wide range of direct restorative procedures. Its advanced technology offers excellent aesthetics, reliable mechanical properties, and ease of use for both anterior and posterior restorations.

Key Features :

Technology: Uses nano-hybrid technology, which incorporates a mix of different-sized filler particles, including nano-fillers. The "nano-optimized" formulation provides excellent strength, high polishability, and low wear.

Aesthetics: The material features nano-color pigments and specific filler technology that create a "chameleon effect." This allows the restoration to blend in naturally with the surrounding tooth structure. A wide range of shades is available, including enamel, dentin, bleach, and highly translucent options.

Handling: A nano-modifier ensures that the composite has optimal stability and is easy to sculpt without sticking to instruments.

Mechanical properties: It is known for low polymerization shrinkage and high strength.

Specification :

Universal use: Suitable for restorations in both the anterior (front) and posterior (back) teeth.

Cavity classifications: Recommended for Class I, II, III, IV, and V restorations.

Other applications:

Restoration of deciduous (baby) teeth.

Extended fissure sealing.

Direct veneers.

Splinting of mobile teeth.

Blocking out of undercuts.

Repair of composite and ceramic veneers.

Composite build-up

Packaging :

1 x 3.5g Syr

Description:

Ivoclar Tetric N-Ceram Bulk Fill is a light-curing, packable composite resin designed for fast and efficient posterior tooth restorations. It is part of the nano-optimized Tetric N-Collection and offers the key benefit of placing restorations in a single layer up to 4 mm thick.

Key Features :

Patented Ivocerin light initiator: This highly reactive initiator allows for a faster and more reliable depth of cure, ensuring that restorations are fully cured even in deep cavities.

Reduced shrinkage stress: The material contains a specially developed shrinkage stress reliever to minimize polymerization shrinkage and stress.

Advanced filler technology: The composite uses advanced fillers, including barium glass, ytterbium trifluoride, and prepolymers, to provide high strength and durability.

Esthetic results: Tetric N-Ceram Bulk Fill offers esthetic results that blend well with natural tooth structure, especially in cases with unstained dentin.

Handling properties: It is a packable, non-sticky composite that is easy to adapt to cavity walls.

Specification :

Class I and Class II restorations in the posterior region.

Restoration of primary (baby) teeth.

Class V restorations, such as cervical caries, root erosion, and wedge-shaped defects.

Packaging :

a) 1 x 3.5g Syr

b) 2 x 3.5g Syr(IVA/IVB)

Description:

Ivoclar's Tetric N-Ceram 2 is a nano-hybrid composite used for direct restorative dental procedures on both anterior (front) and posterior (back) teeth. It is part of the Tetric N-Line system of composites, which provides a range of materials with coordinated handling and application.

Key Features :

Aesthetics: Tetric N-Ceram 2 has a chameleon effect that allows the composite

to naturally blend with the surrounding tooth structure for a lifelike

appearance.

Handling: It has a

creamy, low-stick consistency that is easy to contour, shape, and

apply.

Radiopacity: The

material is radiopaque, meaning it is clearly visible on X-rays, which helps

in the diagnosis of secondary caries.

Polishability: The

nano-filled formula contributes to excellent polishability, resulting in a

smooth, lustrous surface.

Shades: The system

includes a variety of enamel and dentin shades to achieve desired esthetic

results.

Technology: It

utilizes nano-optimized filler technology for excellent strength and wear

resistance.

Specification :

Class I–V restorations: Fills and repairs cavities and defects on all tooth

surfaces.

Deciduous teeth restoration: Treats cavities and defects in primary teeth.

Extended fissure sealing: Seals deep grooves and pits on teeth.

Direct veneers:

Creates thin, custom-made layers of composite to improve a tooth's

appearance.

Repair of composite and ceramic veneers: Fixes small chips or damage on existing restorations.

Restoration of occlusal surfaces: Fills cavities on the chewing surfaces of teeth.

Packaging:

1 x 3.5g Syr

Description:

Ivoclar's Tetric N-Ceram 2 is a nano-hybrid composite used for direct restorative dental procedures on both anterior (front) and posterior (back) teeth. It is part of the Tetric N-Line system of composites, which provides a range of materials with coordinated handling and application.

Key Features :

Aesthetics: Tetric N-Ceram 2 has a "chameleon effect" that allows the composite to naturally blend with the surrounding tooth structure for a lifelike appearance.

Handling: It has a creamy, low-stick consistency that is easy to contour, shape, and apply.

Radiopacity: The material is radiopaque, meaning it is clearly visible on X-rays, which helps in the diagnosis of secondary caries.

Polishability: The nano-filled formula contributes to excellent polishability, resulting in a smooth, lustrous surface.

Shades: The system includes a variety of enamel and dentin shades to achieve desired esthetic results.

Technology: It utilizes nano-optimized filler technology for excellent strength and wear resistance..

Specification:

Class I–V restorations: Fills and repairs cavities and defects on all tooth

surfaces.

Deciduous teeth restoration: Treats cavities and defects in primary teeth.

Extended fissure sealing: Seals deep grooves and pits on teeth.

Direct veneers:

Creates thin, custom-made layers of composite to improve a tooth's

appearance.

Repair of composite and ceramic veneers: Fixes small chips or damage on existing restorations.

Restoration of occlusal surfaces: Fills cavities on the chewing surfaces of teeth.

Packaging :

6 x 3.5g Syringes

Description:

Ivoclar Te-Econom Plus is a light-curing, radiopaque micro hybrid composite used for a wide range of direct dental restorations. It is known for being a reliable and cost-effective material.

Key Features :

Material type: It is a Micro hybrid composite, which balances the strength and wear resistance of a traditional composite with good esthetic properties.

Radiopacity: The composite is radiopaque, meaning it is visible on dental X-rays, which helps dentists evaluate the restoration after placement.

Polishability: The material has good polishability, making it easy to achieve a smooth and esthetic finish.

Specification :

Class I to V restorations: It can be used for restorations in all cavity classes (I, II, III, IV, and V).

Posterior restorations: It can be used for restorations in stress-bearing areas of back teeth.

Core build-ups: The material can be used for the fabrication of core build-ups.

Packaging :

1 x 3g Syringe

Description :

Ivoclar Te-Econom Plus is a light-curing, radiopaque micro hybrid composite used for a wide range of direct dental restorations. It is known for being a reliable and cost-effective material.

Key Features :

Material type: It is a Micro hybrid composite, which balances the strength and wear resistance of a traditional composite with good esthetic properties.

Radiopacity: The composite is radiopaque, meaning it is visible on dental X-rays, which helps dentists evaluate the restoration after placement.

Polishability: The material has good polishability, making it easy to achieve a smooth and esthetic finish.

Specification :

Class I to V restorations: It can be used for restorations in all cavity classes (I, II, III, IV, and V).

Posterior restorations: It can be used for restorations in stress-bearing areas of back teeth.

Core build-ups: The material can be used for the fabrication of core build-ups.

Packaging :

a) 4 x 3g Syr

1 x 5g Bonding Agent

1 x 2g Eco Etch

b) 8 x 3g Syr

1 x 5g Bonding Agent

Description :

Ivoclar Te-Econom Flow is a flowable, light-curing, and radiopaque micro hybrid composite material used for a variety of dental restorative procedures. Its low viscosity allows it to easily flow and adapt to the tooth's contours, making it well-suited for smaller, more detailed dental work. 

Key Features :

Material properties: Te-Econom Flow is a radiopaque micro hybrid composite, meaning it is visible on X-ray images, which aids in post-treatment evaluation and diagnosis. It also offers high wear resistance and low polymerization shrinkage.

Handling: The flowable consistency enables easy handling and precise placement, particularly in hard-to-reach areas of the mouth. This also allows for excellent adaptation to the cavity walls.

Curing: The material is light-cured, hardening when exposed to blue light within the 400–500 nm range. This gives dental professionals precise control over the setting process.

Specification :

Small restorations: Treatment of small posterior restorations (Classes I and II) in non-stress-bearing areas.

Filling mini-cavities: Restorative therapy for all types of mini-cavities, offering easy access and precise placement.

Cavity lining: It can be used as a liner in Class I and Class II cavities, serving as a base under packable composites.

Pediatric dentistry: It is also suitable for use in pediatric dentistry, including restorations on deciduous (baby) teeth.

Packaging :

1 x 2g Syr

Description :

Ivoclar Empress Direct Effects are light-curing composite materials used for esthetic characterization and customization of dental restorations. They are part of the larger IPS Empress Direct composite system and are designed to mimic the intricate optical features of natural teeth, such as opalescence, halo, and translucency.

Features :

Translucent shades (Trans): Three high-translucency shades, Trans 20, Trans 30, and Trans Opal, are used for the incisal area to control light and create a natural-looking incisal halo or opalescent effect.The Effects line features specialized shades to create lifelike optical characteristics. 

Trans Opal: This is a key shade designed to mimic the natural opalescence of incisal edges. It appears bluish in reflected light and reddish-orange in transmitted light.

Polishing: Polishes to a high, long-lasting gloss.

Wear Resistance: Exhibits reliable wear resistance for stress-bearing areas.

Key Specification :

Lifelike Esthetics: Enables the reproduction of natural optical phenomena like opalescence and translucency, which is crucial for high-end anterior restorations.

Precise Characterization: The flowable consistency allows for precise and detailed application to create anatomical features like mamelons and halos.

Excellent Handling: The material is easy to apply and sculpt, holding its shape well.

Efficient Customization: Streamlines the process of customizing restorations by providing specialized, easy-to-use effect materials.

Seamless Integration: Can be combined with the main IPS Empress Direct sculptable composite and other characterization materials within the system.

Packaging :

1 x 1.8g flow Syringe

1 x 3g syringe

Description :

Ivoclar IPS Empress Direct is a highly esthetic, light-curing nano-hybrid composite designed for direct restorative procedures on both anterior and posterior teeth. It combines the lifelike appearance of ceramics with the simple application of a composite.

Features :

Nano-hybrid formula: An even distribution of filler particles allows for quick, effortless polishing and long-lasting gloss retention.

Intuitive shade system: The system is based on an anatomical layering technique, where dentin shades replace natural dentin and enamel shades replicate natural enamel.

Comprehensive shade selection: There are 32 shades across five levels of translucency, including dentin, enamel, and translucent materials.

Dentin shades: Available in 13 shades (e.g., A1, A2, B1), these have a natural opacity similar to dentin to build the tooth's core color.

Enamel shades: Available in 16 shades (e.g., A1, A2, B1), these are more translucent, like natural enamel, allowing light to diffuse naturally through the restoration.

Key Specification :

This composite is versatile and indicated for a variety of esthetic restorations in both the anterior and posterior regions, including: 

Class III, IV, and V restorations

Class I and II restorations

Diastema closure (spacing correction)

Correction of tooth shape and position

Lengthening incisal edges

Direct veneers

Packaging :

1 x 3g Syringe

Description :

Ivoclar's IPS Empress Direct Colors are flowable, light-curing materials used for the detailed characterization and customization of dental restorations. They can be applied to both composite and ceramic surfaces to create natural-looking internal color effects, accentuate anatomical features, and mask discolorations.

Key Features :

Highly pigmented: The material contains a high concentration of color pigments, which allows for strong masking capabilities and consistent color results, even when applied in very thin layers.

Flowable consistency: The material's flowable nature allows for easy and precise application.

Precise application tips: It is dispensed from a syringe with ultra-fine tips (as small as 0.4 mm in diameter), enabling accurate placement for fine details.

Specification :

Natural characterizations: Creating internal color effects and mimicking natural characteristics within direct composite restorations.

Masking discolorations: Can be used to mask severe or localized discolorations in the tooth structure.

Indirect CAD/CAM restorations: Customizing the shade of indirect restorations, including those created with CAD/CAM technology.

Accentuation: Highlighting and accentuating anatomical features like mamelons (rounded protuberances on the incisal edge of newly erupted teeth).

Fine detailing: The fine tips make it ideal for drawing the finest details, such as enamel cracks. 

Packaging

1 x 1.8 g Syringe